High grade toothed wheel pump with metallic gear. he pump can be operated either by receiver current (e.g. by a battery switch / dual power supply) or by a separate battery (e.g. 2S LiPo battery).
The PowerSmoke 740 HV is the follow-up model of the PowerSmoke 600 with revised electronics and enhanced software features.
The smoke-pump can be controlled (at the pressure side) either with an electric-magnetically valve (directly controlled by pump-electronics) or a (low cost) valve especially developed by us. "Pinpointed" turning the smoke on or off is accomplished and a so called "after-smoke" is inhibited. Both valves are available as accessory.
Delivery incl. retaining clamps, screws, receiver connection cable, programming jumper and operating manual.
- Dimensions: 67mm x 27mm (2.64in x 1.06in) (lenght x diameter)
- Rest current consumption: approx. 30mA (receiver switched on)
- Weight: 90g (3.17oz)
- Maximum delivery pressure: approx. 4,5 bar
|Ø 2.5mm (0.1in)||600mm (23.62in)||300mm (11.81in)||---||---|
|Ø 4.0mm (0.16in)||1500mm (59.06in)||1000mm (39.37in)||750mm (29.53in)||600mm (23.62in)|
|supply voltage [V]||delivery rate [ml/min.]||power consumption [mA]|
|9.6||not permitted||>not permitted|
|11,1||>not permitted||>not permitted|
- Foto2 (33 KB)
- Foto3 (22 KB)
- Istruzioni (1.065 KB)
1Codice: 8FTUBTELPrezzo:€ 6,00