PowerBox COCKPIT SRS + SENSORSWITCH - NEW

PowerBox COCKPIT SRS + SENSORSWITCH - NEW

PowerBox COCKPIT SRS + SENSORSWITCH - NEW

SKU: PBXCOCKS
PowerBox COCKPIT SRS
Price:
€382.13
Listing:
€436.15
You Save:
€54.02 (12%)
To buy this product contact us at ordini@8fly.it

Description

PowerBox Cockpit SRS (Serial Receiver System)

Features:
  • For Spektrum and Jeti satellites, Futaba S-BUS and Multiplex M-LINK receivers
  • All channels from the receiver are transferred using a three-core lead
  • Complete receiver redundancy, double the security
  • Complete battery redundancy: two batteries, two electronic switches, redundant output voltage with dual regulation
  • Spektrum with four satellites, Futaba with two S-Bus receivers, Multiplex with two M-Link receivers, Jeti with two satellites
  • High-resolution graphic OLED screen with 128 x 64 pixels
  • Ultra-simple menu-based programming using the SensorSwitch
  • Eleven channels + one channel for door sequencer
  • Downlink channel transmission for Spektrum and MPX
  • Unrestricted channel assignment for all output sockets, (channel output mapping)
  • Synchronised servo outputs for totally simultaneous servo movements
  • Four-stage user-variable servo frame rate (12 ms, 15 ms, 18 ms, 21 ms)
  • Integral freely programmable door sequencer
  • The unit saves receiver data, such as "lost frames" and "failsafes", for all connected receivers - whether Spektrum, Futaba, Multiplex, Jeti. Data can be read out after the flight on the OLED screen
  • Four match-channels for two servos each; both servos individually variable
  • 16-bit processor for high-speed, high-resolution signal processing
  • Signal amplification for a total of 12 channels and 21 servos
  • Direct transmission of battery voltages and capacities to the transmitter (downlink channels)
  • On-screen voltage display for each battery separately, with bar indicator
  • Residual capacity display for both batteries separately
  • User-variable servo voltage: choice of 5.9 V or 7.4 V
  • Minimum value memory shows any voltage collapses
  • Large-area heat-sink for high regulator capacity
  • Regulator monitor and regulator error indicator
  • Supports three battery types: LiPo, LiIon, NiMH / NiCd, LiFePo
  • Suppression of any servo feedback currents which might occur

Datasheet

Specification:
* Bus systems for seriell receivers from: Spektrum, Futaba, Multiplex, Jeti
* Operating voltage: 4,0 Volts to 9,0 Volts
* Power source: 2 x two-cell LiPO batteries 7,4 Volts 2 x five-cell NiCd or. NiMH batteries 2 x two-cell LiFePo batteries 6,6 Volts (A123)
* Current drain: Power-on state approx. 130 mA Power-off state approx. 15 µA
* Dropout voltage: approx. 0,25 V
* Max. seriell receiver current 2 x 3 A (stabilised)
* Max. servo current: according to efficiency of cooling Peak 2 x 20 A
* Servo signal resolution: 0,5µs
* Signal frame rate: User variable: 12ms, 15ms, 18ms, 21ms
* Screen: OLED 128 x 64 pixels, graphic
* Servo sockets: 21 sockets, 12 channels, 4 of them match-channels, single-channel door sequencer with 6 servo sockets
* Temperature range: - 30 °C to + 75 °C
* Dimensions: 110 x 72 x 24 mm (incl. base plate)
* Weight: 115 g
* SensorSwitch: 15 g
* EMV approval: EN 55014-1:2006 CE approval: 2004/108/EG