Landing lights 20mm (0.79in) "Viper" -
20mm (0.79in) landing light with a viewing angle of 20° and 1 to 3W power.
High quality landing light with CNC milled and anodized casing. Ready to install.
Attention: Within continuous operation the LEDs must not be illuminated longer than 15 minutes. The LEDs are going to be very hot!
Attention: Landing light is very bright, don't look into the cone of light from closer distance.
Before using a suitable resistor must be soldered. Find an overview of suitable resistors within the section Scheda Tecnica.
Delivery includes resistors.
1 watt operating: Reduced wattage, low cooling necessary. Reduced brightness.
|R at 1S LiPo||2R7|
|R at 4.8V NiMH||6R8|
|R at 2S LiPo||15R|
|R at 2S LiFePO4||12R|
2.5 watt operating: Nominal wattage, good cooling necessary. Normal brightness.
|R at 1S LiPo||0R82|
|R at 4.8V NiMH||2R7|
|R at 2S LiPo||6R8|
|R at 2S LiFePO4||4R7|
3.7 watt operating: Peak performance for blink operating. Highest brightness.
|R at 1S LiPo||0R47|
|R at 4.8V NiMH||1R8|
|R at 2S LiPo||4R7|
|R at 2S LiFePO4||3R3|
|Operating temperature||-40°C to 85°C |
-40°F to 185°F
|Storage temperature||-40°C to 100°C|
-40°F to 212°F
1Codice: OPT4305Prezzo:€ 3,67